Comma in Morse Code (--..--)

The comma in Morse code is --..-- — dash-dash-dot-dot-dash-dash, a six-element pattern with a distinctive “long-short-long” shape. If you have already learned the period (.-.-.-) and the question mark (..--..), the comma completes the everyday sentence-punctuation trio. Try it yourself: type any sentence with a comma into the Morse Code Translator and listen for --..-- right where the pause belongs.

What is the comma in Morse code?

In International Morse Code, the comma is sent as six elements: --..--. Say it out loud as “dahdah-didit-dahdah” — two long tones, two short ones, two long ones. The shape is easy to feel once you hear it: it opens long, dips short in the middle, and closes long, almost like a comma curving around a word. Punctuation marks were not part of Samuel Morse and Alfred Vail’s earliest American Morse, the code used on the 1844 Baltimore–Washington telegraph line. The full standardized punctuation set, including the comma, arrived with International Morse Code, the system coordinated through the ITU (International Telecommunication Union) and still used today by amateur radio operators, aviation beacons, and hobbyists.

Why the comma uses this pattern

Morse punctuation patterns are deliberately long and balanced so they can never be mistaken for a letter mid-transmission. The comma’s --..-- sits in a family of six-element punctuation codes: the period (.-.-.-), the question mark (..--..), and the exclamation mark (-.-.--). The comma is the mirror image of the question mark’s family: it starts with dashes where the question mark starts with dots. Once you learn the four together, each one’s opening pair — dot-dash, dot-dot, dash-dash, or dash-dot — tells you immediately which punctuation you are hearing. That contrast is the whole design philosophy: long, deliberate, and unmistakable, even through static.

How to send a comma in Morse code

Sending --..-- uses the same timing rules as every other Morse character, whether you are tapping a key, blinking a flashlight, or keying a buzzer:

  • Dot: 1 time unit (a short tap or flash)
  • Dash: 3 time units (three times as long as a dot)
  • Gap between elements of one character: 1 time unit
  • Gap between characters: 3 time units
  • Gap between words: 7 time units

So a comma is: long-long-short-short-long-long, with one-unit pauses between the six elements and a three-unit pause after. At 20 words per minute (WPM), one unit is about 60 milliseconds, which makes the whole comma take roughly a second — the same standard timing the Morse Code Translator uses when it plays audio back to you. Practice slowly first: count “one-two-three” for each dash and keep the two dots in the middle crisp and even. Accuracy beats speed, exactly as our guide on how to learn Morse code fast explains.

Simple tricks to memorize --..--

Three memory hooks that students actually keep using:

  1. The “sandwich” picture. See the pattern as a sandwich: two long dashes as the bread, two short dots as the filling. Long-short-short-long is a shape you can feel in your tapping hand before you can name it.
  2. The pause job. A comma marks a short pause inside a sentence — and its pattern literally pauses in the middle. Tap the dashes, hesitate on the quick dots, then land the final dashes like the end of a breath.
  3. Learn it as the question mark’s opposite. The question mark (..--..) starts with dots and ends with dots; the comma (--..--) starts with dashes and ends with dashes. Practicing them back to back makes both permanent — and you already have the question mark guide to pair it with.

Comma vs. other Morse punctuation

Here is the comma alongside the punctuation marks you will meet most often, so you can compare patterns at a glance:

PunctuationMorse codeSound
Comma (,)--..--dahdahdididahdah
Period (.).-.-.-didahdidahdidah
Question mark (?)..--..dididahdahdidit
Exclamation mark (!)-.-.--dahdidahdahdahdit

Notice that every one of these is six elements long, yet each starts differently. The comma is the only one that opens with two consecutive dashes — if you hear “dah-dah” at the start of a punctuation-length pattern, it is the comma. The period is the only one that alternates dot-dash all the way through, and the question mark is the only one that starts with two dots. Learn the openings and you will never mix them up.

Practice: the comma in real messages

The best way to own a new pattern is to use it in full sentences. Encode these with the Morse Code Translator, then decode them back:

  • “HELLO, FRIEND.” → .... . .-.. .-.. --- --..-- / ..-. .-. .. . -. -.. .-.-.-
  • “YES, I AM HERE.” → -.-- . ... --..-- / .. / .- -- / .... . .-. . .-.-.-
  • “SLOW DOWN, PLEASE.” → ... .-.. --- .-- / -.. --- .-- -. --..-- / .--. .-.. . .- ... . .-.-.-

Notice how the comma sits inside a sentence with character gaps on both sides, while the 7-unit word gap separates the words. Getting the spacing right is what turns beeps into readable language — the same spacing discipline that keeps numbers like 9 (----.) and letters like A (.-) unambiguous in real traffic. Ham radio operators practice these gaps on every contact; if on-air operating culture interests you, our piece on what “73” means in ham radio is a good next read.

Common mistakes with the comma

Two errors trip up almost everyone. First, shortening the dashes: the comma needs four full-length dashes, two at the start and two at the end. Shorten them and --..-- collapses toward something that sounds like a mangled letter. Second, running the dots together: the two dots in the middle need their one-unit gap, or “didit” blurs into one long tone and the receiver loses the pattern entirely. Slow down, count the elements — dash, dash, dot, dot, dash, dash — and the comma becomes one of your most reliable characters.

FAQ: the comma in Morse code

What is a comma in Morse code?

A comma in International Morse Code is --..--: dash-dash-dot-dot-dash-dash, six elements long. It marks a short pause inside a sentence and is part of the international punctuation set maintained through the ITU.

How do you remember --..--?

Think “dahdah-didit-dahdah” — two long tones, two short ones, two long ones, like a sandwich with long dashes as the bread. Learning it back to back with the question mark (..--..), its dash-first opposite, also locks both patterns in.

Is the comma used in amateur radio traffic?

Yes. Commas appear in regular radiograms and informal on-air exchanges, and traffic-net operators sometimes send it as the MIM prosign. If you are getting into ham radio, our guide to what “73” means in ham radio introduces the culture of on-air abbreviations.

Can I type a comma into the Morse Code Translator?

Yes. Paste or type any sentence containing a comma into the Morse Code Translator and it will render the comma as --..--, play it back in audio, and let you copy the full translation.

What punctuation should I learn after the comma?

Learn the exclamation mark (-.-.--) next. Together with the comma, period, and question mark, it completes the four punctuation marks that cover nearly all everyday sentence writing in Morse code.

The comma is small, but it is doing real work: it is what turns a stream of dits and dahs into sentences with natural pauses, exactly like the comma on your keyboard. Master --..--, keep the dashes full-length and the middle dots crisp, and practice a few punctuated sentences a day — within a week the “dahdah-didit-dahdah” will feel as natural as breathing mid-sentence. For inspiration on what fluent operators can do with the code, browse our collection of famous messages sent in Morse code, from wartime signals to space transmissions.

Sources: the International Morse Code punctuation set is documented on Wikipedia’s Morse code page and in Britannica’s overview of Morse code; international standards are maintained by the International Telecommunication Union (ITU).

Related Posts